X4

In the Box
Specs
How to Use
Notes
2x X4 Premium Lens Guards
1x Lens Cloth
1× Manual
Material:
Glass, plastic
Weight:
3.8g (0.1oz)
Dimensions:
34.8×34.8×12.8mm (1.4x1.4×0.5in)
1. Installing
Align the orange mark on the Lens Guards with the lower right
slot of the lens, as shown below. Then, rotate the Lens Guards
clockwise and align it with the camera's microphone
2. Turn on "Lens Guard Mode" d
Power on the camera. Swipe down from the top of the
touchscreen to access the Shortcut Menu and you will see the
"Lens Guard Mode" icon d. If the icon is gray, it is turned off.
Tap to turn it on when the Lens Guards are installed, and the
icon will light up
3. Removing
Hold down the edge of the base of the Lens Guards and twist
counterclockwise to remove. Then, turn off "Lens Guard
Mode" " on the camera.
1. Do not squeeze or pull the base too hard when installing the
Lens Guards, as this may change the shape or reduce the
adhesiveness.
2. Ensure the Lens Guards are securely installed before using
your camera. The orange mark on the Lens Guards should be
aligned with the camera's microphone.
3. Enable "Lens Guard Mode" ] when using the Lens Guards
and turn it off after removing them.
4. Dirty or worn Lens Guards may affect the final image result